Ship From EU Launch X431 X-PROG 3 XPROG3 and MCU3 Adapter for All Keys Lost and ECU TCU Reading

 

X-PROG 3 Highlight

1. All-in-One Key Programmer. Integrates Multiple Function Models.
2. Powerful chip reading device that can read and write keys to the vehicle. 
3. supports advanced coding/programming functions: - VW/AUDI MQB platform engine&gearbox ECU replacement or cloning (Read engine ECU data directly from the key). - ECU replacement for 4TH Generation Audi (0AW/0B5) gearboxs. - Reading, writing & cloning of the ECU for 4TH Generation VW UDS engines. - BMW E chassis 8HP gearbox ECU program wiping,.etc.
4. Compatible with X-431 series Tablet: X431 V, X431 V+, X431 PRO3, X431 PRO5, X431 PROS, X431 PRO3S+, X431 PAD III, X431 PAD V, X431 PAD VII, X431 IMMO Serial etc..
5. Supported 60+brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, Opel, Renault, PSA, Fiat etc.. 
6. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. More models and systems continue to be updated.
7. Ship From EU, fast delivery, NO TAX !

XPROG3 Advantage Functions

1. Read BMW engine ISN code.
2. Read/write BMW CAS4+ and FEM chips.
3. Read/write Audi fifth-generation steering column chips
4. Read/write EEPROM.
5. Read/write MCU.
6. VW Fourth-generation Dump Mode All Keys Lost.
7. Read engine in BENCH mode.
8. Read gearbox data.
9. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
10. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
11. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
12. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
13. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
14. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU)
etc..



How to Use X-PROG3 to Read and Write Data?

Way 1: Directly connect to OBD16 for key matching, data reading and writing, etc.

Way 2: Put the IMMO EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC chip and the diagnostic host.

Way 3: After removing the ECU from the car, connect the ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the ECU and the diagnostic host.



Applications and advantages of the new MCU3 adapter:

-For ADAS Advanced Driving Assist System
-For Audi VW MQB gearbox replacement
-For BMW continental msv90 engine ecu replacement and cloning
-For Peugeot Key Programming
-For Mercedes Benz transmission deleted and operating instructions vgs nag2 vgs2 nag2 and vgs3 nag2
-For Mercedes Benz w164 2009 Key Programming
-For Volkswagen Audi 5th generation engine reading engine data via direct connection and online programming and coding
-For BMW E chassis 8hp EGS deleted
-For BMW 8hp chassis F and G delete function
-Key programming cas4/cas4+ all keys lost and adding keys
-Programming cas1 cas2 cas3 cas3+ lost keys and add key
-CAS4 immobilizer module replacement
-Replacement for Volkswagen Audi engine and reading data med17 and edc17
-For Mercedes Benz med9.7 ecu deleted
-For Volkswagen Audi Replacement 4th Generation Instrument Replacement
-Engine replacement for Volkswagen Audi MED17.5.22
-Programming of lost keys and adding key for Pors-che Cayenne 2011 2017
-Cloning and virginization e39 ac delco
-Power shift cloning and virginization
-For Nissan ecu and Tcm conversion and virgin ecu programming and calibrations
-Special features for Ch-r-ysler and registration at autoauth FCA sgw
-Special features for GM and for Ford

When is it can be used?

1. Use the BENCH mode to clone the ECU module, when the 120 ohm resistor is connected as shown in Figure 1, or when the +12V power supply is connected to the IMMO programmer board; the IMMO programmer MCU3 adapter board (with its own power supply) can be used, as shown in Figure 2.
Figure 1:



Figuire 2:


2. With all keys lost for Mercedes-Benz, and the connection for key learning is shown in Figure 3 when operating on the platform.

Figuire 3:



Package List:

1pc x Launch X-PROG 3
1pc x Power adaptor
1pc x Main diagnostic cable
1pc x The fourth-generation data acquisition cable
1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc x BENCH mode cable
1pc x MCU converter V1
1pc x MCU converter V2
1pc x MCU cable with multiple leads
1pc x EEPROM chip adaptor
1pc x Benz infrared analog acquisition key
1pc x MCU cable with multiple leads
1pc x EEPROM converter
1pc x User Manual
1pc x IMMO programmer MCU3 adapter board kit
 

WhatsApp: +86 18750906257